TEIN · TECHNICAL DATA
Specifications & vehicle fitment
Use the details for your vehicle grade. Production periods and certificate scope apply only to the stated application.
Product overview
- Manufacturer part number
- VSTD0-C1AS3
- Product series
- FLEX Z
- Product type
- Coilover suspension kit
Specifications & supplied components
- Height adjustment by lower bracket
- Yes
- Height adjustment by spring seat
- Yes
- Damping adjustable
- Yes
- Twin-tube construction
- Yes
- Damping adjustment
- Yes, 16 settings
- Ride-height adjustment
- Full-length, depending on axle design
- Damper construction
- Twin-tube
Approval & application scope
- Approval
- without TÜV certificate, not road approved
Vehicle gradeTOYOTA PRIUS · ZVW50 S, S TOURING
12/2015 to 11/2018
- make
- TOYOTA
- model
- PRIUS
- grade
- ZVW50 S, S TOURING
- production period
- 12/2015 to 11/2018
- drivetrain
- Front-wheel drive (FWD)
- displacement as listed by TEIN
- 1800 cm³
- spring rate front
- 4 kgf/mm
- standard height change front
- -30 mm
- recommended lowering front
- 20–40 mm
- spring rate rear
- 4.7 kgf/mm
- standard height change rear
- -30 mm
- recommended lowering rear
- 20–40 mm
- installation notes
- FT: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. FT/RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND.
Vehicle gradeTOYOTA PRIUS · ZVW51 A PREMIUM, A PREMIUM TOURING, A, A TOURING
12/2015 to 11/2018
- make
- TOYOTA
- model
- PRIUS
- grade
- ZVW51 A PREMIUM, A PREMIUM TOURING, A, A TOURING
- production period
- 12/2015 to 11/2018
- drivetrain
- Front-wheel drive (FWD)
- displacement as listed by TEIN
- 1800 cm³
- spring rate front
- 4 kgf/mm
- standard height change front
- -30 mm
- recommended lowering front
- 20–40 mm
- spring rate rear
- 4.7 kgf/mm
- standard height change rear
- -30 mm
- recommended lowering rear
- 20–40 mm
- installation notes
- NOT TESTED ON E MODELS. FT: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. FT/RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND.
Vehicle gradeTOYOTA PRIUS · ZVW51 A PREMIUM, A, S, E, TOURING SELECTION A, A PREMIUM, S
12/2018 to 12/2022
- make
- TOYOTA
- model
- PRIUS
- grade
- ZVW51 A PREMIUM, A, S, E, TOURING SELECTION A, A PREMIUM, S
- production period
- 12/2018 to 12/2022
- drivetrain
- Front-wheel drive (FWD)
- displacement as listed by TEIN
- 1800 cm³
- spring rate front
- 4 kgf/mm
- standard height change front
- -30 mm
- recommended lowering front
- 20–40 mm
- spring rate rear
- 4.7 kgf/mm
- standard height change rear
- -30 mm
- recommended lowering rear
- 20–40 mm
- installation notes
- NOT TESTED ON E MODELS. FT: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. FT/RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND.
EDFC & accessories
- EDFC compatibility
- Components in the following manufacturer applications are available separately. EDFC is not automatically supplied with the suspension kit.
- EDFC application 001
- TOYOTA PRIUS ZVW50: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12120
- EDFC application 002
- TOYOTA PRIUS ZVW51: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12120
- EDFC installation note 001
- Rr : Motor needs to be fitted to damper prior to installation
- EDFC installation note 002
- Rr : Motor needs to be fitted to damper prior to installation
Weight & manufacturer details
- Weight in TEIN list
- 30.7 kg
Description & frequently asked questions
FLEX Z – Product features and benefits
-
Adjustable damping: Yes, 16 settings
-
Ride-height adjustment: Full-length, depending on axle design
-
Damper construction: Twin-tube
Use the adjustment dial to tune damping to your preferred ride. Compression and rebound change together; spring rate stays the same.
Full-length adjustment separates ride-height setting from spring preload on applicable coilover units. Axles with separate springs and dampers use their specific adjustment layout.
Twin-tube dampers support a suspension setup focused on road comfort.
EDFC application assignments are available for this item. Select the specified controllers, motor kits and accessories separately; they are not automatically included.
The vehicle applications for this item specify ride-height values, spring rates, upper mounts and installation notes.
More about this range FLEX Z
TEIN FLEX Z – VSTD0-C1AS3
TEIN FLEX Z, part VSTD0-C1AS3. Applications listed for TOYOTA PRIUS. Check chassis, grade, production period and installation notes.
Technical information and application
The technical attributes retain the vehicle-specific figures and installation notes from the manufacturer catalogue. Use only the values for your exact application. Production dates are not necessarily the same as first registration.
Questions about this product
How do I check fitment?
Compare the exact manufacturer part number and the relevant application data. Where vehicle applications are listed, also check chassis code, grade, production period and any equipment exclusions.
Does a vehicle listing confirm road approval?
No. Technical fitment and approval are separate. Any certificate note applies only to its stated scope. Refer to the complete documents for the specific vehicle.
Example image – the actual product may differ from the illustration.
Characteristics & additional product details
There are no reviews yet.
2% bank transfer discount
EU delivery with FedEx
Free shipping from €500
