TEIN · TECHNICAL DATA
Specifications & vehicle fitment
Use the details for your vehicle grade. Production periods and certificate scope apply only to the stated application.
Product overview
- Manufacturer part number
- VSGP2-N1AA3
- Product series
- FS2
- Product type
- Coilover suspension kit
Specifications & supplied components
- Height adjustment by spring seat
- Yes
- Damping adjustable
- Yes
- Twin-tube construction
- Yes
- Damping adjustment
- Yes, 16 combined settings plus 16 compression settings
- Ride-height adjustment
- Via spring seats
- Damper construction
- Twin-tube
- HBS in series overview
- Yes
Approval & application scope
- Approval
- without TÜV certificate, not road approved
Vehicle gradeTESLA MODEL 3 · STANDARD RANGE / PLUS
2017 to 2023
- make
- TESLA
- model
- MODEL 3
- grade
- STANDARD RANGE / PLUS
- production period
- 2017 to 2023
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -45 mm
- recommended lowering front
- 35–55 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -35 mm
- recommended lowering rear
- 30–50 mm
- installation notes
- RR: INTERIOR NEEDS TO BE CUT OR REMOVED, TO AVOID.RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND DUE TO VEHICLE STRUCTURE.
Vehicle gradeTESLA MODEL 3 · STANDARD PLUS (VEHICLES PRODUCED IN CHINA)
from 2017
- make
- TESLA
- model
- MODEL 3
- grade
- STANDARD PLUS (VEHICLES PRODUCED IN CHINA)
- production period
- from 2017
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -45 mm
- recommended lowering front
- 35–55 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -40 mm
- recommended lowering rear
- 30–50 mm
- installation notes
- RR: INTERIOR NEEDS TO BE CUT OR REMOVED, TO AVOID.RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND DUE TO VEHICLE STRUCTURE.
Vehicle gradeTESLA MODEL 3 · STANDARD PLUS (EXCLUDING VEHICLES PRODUCED IN CHINA)
from 2017
- make
- TESLA
- model
- MODEL 3
- grade
- STANDARD PLUS (EXCLUDING VEHICLES PRODUCED IN CHINA)
- production period
- from 2017
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -45 mm
- recommended lowering front
- 35–55 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -35 mm
- recommended lowering rear
- 25–45 mm
- installation notes
- RR: INTERIOR NEEDS TO BE CUT OR REMOVED, TO AVOID.RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND DUE TO VEHICLE STRUCTURE.
Vehicle gradeTESLA MODEL 3 · STANDARD RANGE / PLUS
from 2024
- make
- TESLA
- model
- MODEL 3
- grade
- STANDARD RANGE / PLUS
- production period
- from 2024
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -45 mm
- recommended lowering front
- 35–55 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -35 mm
- recommended lowering rear
- 30–50 mm
- installation notes
- RR: INTERIOR NEEDS TO BE CUT OR REMOVED, TO AVOID.RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND DUE TO VEHICLE STRUCTURE.
Vehicle gradeTESLA MODEL 3 · 3L13 STANDARD RANGE PLUS
09/2019 to 08/2023
- make
- TESLA
- model
- MODEL 3
- grade
- 3L13 STANDARD RANGE PLUS
- production period
- 09/2019 to 08/2023
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -35 mm
- recommended lowering front
- 20–40 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -35 mm
- recommended lowering rear
- 25–45 mm
- installation notes
- RR: INTERIOR NEEDS TO BE CUT OR REMOVED, TO AVOID.RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND DUE TO VEHICLE STRUCTURE.
Vehicle gradeTESLA MODEL Y · RWD
from 2021
- make
- TESLA
- model
- MODEL Y
- grade
- RWD
- production period
- from 2021
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -30 mm
- recommended lowering front
- 20–40 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -35 mm
- recommended lowering rear
- 25–45 mm
Vehicle gradeTESLA MODEL Y · RWD
2021 to 2025
- make
- TESLA
- model
- MODEL Y
- grade
- RWD
- production period
- 2021 to 2025
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -30 mm
- recommended lowering front
- 20–40 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -35 mm
- recommended lowering rear
- 25–45 mm
Vehicle gradeTESLA MODEL Y · YL1YT STANDARD RANGE
06/2022 to 03/2025
- make
- TESLA
- model
- MODEL Y
- grade
- YL1YT STANDARD RANGE
- production period
- 06/2022 to 03/2025
- drivetrain
- Rear-engine, rear-wheel drive (RR)
- spring rate front
- 11 kgf/mm
- standard height change front
- -35 mm
- recommended lowering front
- 25–45 mm
- spring rate rear
- 12 kgf/mm
- standard height change rear
- -35 mm
- recommended lowering rear
- 25–45 mm
Weight & manufacturer details
- Weight in TEIN list
- 24.07 kg
Description & frequently asked questions
FS2 – Product features and benefits
-
Adjustable damping: Yes, 16 combined settings plus 16 compression settings
-
Ride-height adjustment: Via spring seats
-
Damper construction: Twin-tube
FS2 combines a shared compression/rebound adjuster with an additional compression adjuster, each offering 16 settings. External reservoirs add oil capacity and heat dissipation.
Ride height is set through spring-seat position, within the ranges specified for the individual application.
H.B.S. adds hydraulic control near the end of compression travel. The specified bump rubbers are still required.
The vehicle applications for this item specify ride-height values, spring rates, upper mounts and installation notes.
More about this range FS2
TEIN FS2 – VSGP2-N1AA3
TEIN FS2, part VSGP2-N1AA3. Applications listed for TESLA MODEL 3 / TESLA MODEL Y. Check chassis, grade, production period and installation notes.
Technical information and application
The technical attributes retain the vehicle-specific figures and installation notes from the manufacturer catalogue. Use only the values for your exact application. Production dates are not necessarily the same as first registration.
Questions about this product
How do I check fitment?
Compare the exact manufacturer part number and the relevant application data. Where vehicle applications are listed, also check chassis code, grade, production period and any equipment exclusions.
Does a vehicle listing confirm road approval?
No. Technical fitment and approval are separate. Any certificate note applies only to its stated scope. Refer to the complete documents for the specific vehicle.
Example image – the actual product may differ from the illustration.
Characteristics & additional product details
TEIN EUROPE sp. z o.o., ul. Wrzesinska 70, 62-025 Kostrzyn, Poland, Email: info@eu.tein.com
There are no reviews yet.
2% bank transfer discount
EU delivery with FedEx
Free shipping from €500
