TEIN FLEX Z Coilover Suspension for NISSAN 180SX / NISSAN 200SX, etc. – VSN20-C1SA4 – Example image – the actual product may differ from the illustration.

TEIN FLEX Z Coilover Suspension for NISSAN 180SX / NISSAN 200SX, etc. – VSN20-C1SA4

SKU: TEIN-VSN20-C1SA4
HAN: VSN20-C1SA4
Category: Coilovers
Manufacturers: TEIN

Adjustable damping: Yes, 16 settings · Ride-height adjustment: Full-length, depending on axle design · Damper construction: Twin-tube

TEIN FLEX Z, part VSN20-C1SA4. Applications listed for NISSAN 180SX / NISSAN 200SX and others. Check chassis, grade, production period and installation notes.

Example image – the actual product may differ from the illustration.

RRP: ~~1.154,30 €~~ You save 3%

1.119,67 €

incl. 19% VAT ,

2% discount â€“ when paying in advance by bank transfer

Available immediately
Delivery time: 2 - 7 Workdays (DE - int. shipments may differ)

Set

TEIN · TECHNICAL DATA

Specifications & vehicle fitment

Use the details for your vehicle grade. Production periods and certificate scope apply only to the stated application.

Product overview

Manufacturer part number: VSN20-C1SA4
Product series: FLEX Z
Product type: Coilover suspension kit

Specifications & supplied components

Height adjustment by lower bracket: Yes
Height adjustment by spring seat: Yes
Damping adjustable: Yes
Twin-tube construction: Yes
Damping adjustment: Yes, 16 settings
Ride-height adjustment: Full-length, depending on axle design
Damper construction: Twin-tube

Approval & application scope

Approval: without TÜV certificate, not road approved

Vehicle gradeNISSAN 180SX · KRPS13 TYPE I, TYPE II, TYPE III, TYPE G, TYPE R, TYPE X, TYPE S 01/1991 to 02/1999

make: NISSAN
model: 180SX
grade: KRPS13 TYPE I, TYPE II, TYPE III, TYPE G, TYPE R, TYPE X, TYPE S
production period: 01/1991 to 02/1999
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 2000 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

Vehicle gradeNISSAN 180SX · KRS13 TYPE I, TYPE II 04/1989 to 12/1990

make: NISSAN
model: 180SX
grade: KRS13 TYPE I, TYPE II
production period: 04/1989 to 12/1990
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 1800 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

Vehicle gradeNISSAN 180SX · RPS13 TYPE I, TYPE II, TYPE III, TYPE G, TYPE R, TYPE X, TYPE S 01/1991 to 02/1999

make: NISSAN
model: 180SX
grade: RPS13 TYPE I, TYPE II, TYPE III, TYPE G, TYPE R, TYPE X, TYPE S
production period: 01/1991 to 02/1999
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 2000 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

Vehicle gradeNISSAN 180SX · RS13 TYPE I, TYPE II 04/1989 to 12/1990

make: NISSAN
model: 180SX
grade: RS13 TYPE I, TYPE II
production period: 04/1989 to 12/1990
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 1800 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

Vehicle gradeNISSAN 200SX · S13 1989 to 1993

make: NISSAN
model: 200SX
grade: S13
production period: 1989 to 1993
displacement as listed by TEIN: 2000 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

Vehicle gradeNISSAN 240SX · S13 1989 to 1994

make: NISSAN
model: 240SX
grade: S13
production period: 1989 to 1994
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 2400 cm³
spring rate front: 7 kgf/mm
standard height change front: -50 mm
recommended lowering front: 40–60 mm
spring rate rear: 5 kgf/mm
standard height change rear: -50 mm
recommended lowering rear: 40–60 mm

Vehicle gradeNISSAN SILVIA · KPS13 J'S, Q'S, K'S 01/1991 to 10/1993

make: NISSAN
model: SILVIA
grade: KPS13 J'S, Q'S, K'S
production period: 01/1991 to 10/1993
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 2000 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

Vehicle gradeNISSAN SILVIA · PS13 J'S, Q'S, K'S 01/1991 to 10/1993

make: NISSAN
model: SILVIA
grade: PS13 J'S, Q'S, K'S
production period: 01/1991 to 10/1993
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 2000 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

Vehicle gradeNISSAN SILVIA · S13 J'S, Q'S, K'S 05/1988 to 12/1990

make: NISSAN
model: SILVIA
grade: S13 J'S, Q'S, K'S
production period: 05/1988 to 12/1990
drivetrain: Rear-wheel drive (RWD)
displacement as listed by TEIN: 1800 cm³
spring rate front: 7 kgf/mm
standard height change front: -45 mm
recommended lowering front: 35–55 mm
spring rate rear: 5 kgf/mm
standard height change rear: -25 mm
recommended lowering rear: 15–35 mm

EDFC & accessories

EDFC compatibility: Components in the following manufacturer applications are available separately. EDFC is not automatically supplied with the suspension kit.
EDFC application 001: NISSAN SILVIA KPS13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC application 002: NISSAN 180SX KRPS13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC application 003: NISSAN 180SX KRS13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC installation note 001: Ft+Rr: Modifications are required
EDFC installation note 002: Ft+Rr: Modifications are required
EDFC installation note 003: Ft+Rr: Modifications are required
EDFC application 004: NISSAN SILVIA PS13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC installation note 004: Ft+Rr: Modifications are required
EDFC application 005: NISSAN 180SX RPS13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC installation note 005: Ft+Rr: Modifications are required
EDFC application 006: NISSAN 180SX RS13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC application 007: NISSAN SILVIA S13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC installation note 007: Ft+Rr: Modifications are required
EDFC installation note 006: Ft+Rr: Modifications are required
EDFC application 008: NISSAN 200SX S13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC installation note 008: Ft+Rr: Modifications are required
EDFC application 009: NISSAN 240SX S13: Controller EDK04-R6655; GPS EDK07-P8022; Motorkit EDK05-12140; Additional part 1 EDK06-K4474
EDFC installation note 009: Ft+Rr: Modifications are required

Weight & manufacturer details

Weight in TEIN list: 28.55 kg

Description & frequently asked questions

FLEX Z – Product features and benefits

Adjustable damping: Yes, 16 settings
Ride-height adjustment: Full-length, depending on axle design
Damper construction: Twin-tube

Use the adjustment dial to tune damping to your preferred ride. Compression and rebound change together; spring rate stays the same.

Full-length adjustment separates ride-height setting from spring preload on applicable coilover units. Axles with separate springs and dampers use their specific adjustment layout.

Twin-tube dampers support a suspension setup focused on road comfort.

EDFC application assignments are available for this item. Select the specified controllers, motor kits and accessories separately; they are not automatically included.

The vehicle applications for this item specify ride-height values, spring rates, upper mounts and installation notes.

More about this range FLEX Z

TEIN FLEX Z – VSN20-C1SA4

TEIN FLEX Z, part VSN20-C1SA4. Applications listed for NISSAN 180SX / NISSAN 200SX and others. Check chassis, grade, production period and installation notes.

Technical information and application

The technical attributes retain the vehicle-specific figures and installation notes from the manufacturer catalogue. Use only the values for your exact application. Production dates are not necessarily the same as first registration.

Questions about this product

How do I check fitment?

Compare the exact manufacturer part number and the relevant application data. Where vehicle applications are listed, also check chassis code, grade, production period and any equipment exclusions.

Does a vehicle listing confirm road approval?

No. Technical fitment and approval are separate. Any certificate note applies only to its stated scope. Refer to the complete documents for the specific vehicle.

Example image – the actual product may differ from the illustration.

Characteristics & additional product details

Item information	Value
Approval:	without TÜV certificate, not road approved
Product series:	FLEX Z
Vehicle manufacturer:	NISSAN
Vehicle model:	200SX 240SX 180SX SILVIA
Drivetrain:	Rear-wheel drive (RWD)
Damping adjustable:	Yes
Shipping weight:	28,55 kg
Item weight:	28,55 kg

TEIN EUROPE sp. z o.o., ul. Wrzesinska 70, 62-025 Kostrzyn, Poland, Email: info@eu.tein.com

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Question about item

Your question