TEIN · TECHNICAL DATA
Specifications & vehicle fitment
Use the details for your vehicle grade. Production periods and certificate scope apply only to the stated application.
Product overview
- Manufacturer part number
- VSTN0-C1AA3
- Product series
- FLEX Z
- Product type
- Coilover suspension kit
- Vehicle manufacturer
- TOYOTA
- Vehicle model
- GR YARIS
- Drivetrain
- All-wheel drive (AWD)
- Engine displacement as listed by TEIN
- 1,600 cm³
- Front spring rate
- 6 kgf/mm
- Rear spring rate
- 7 kgf/mm
- Check vehicle application
- Chassis code, grade and production period must match one of the applications below. Ride-height figures apply only to the stated grade.
Specifications & supplied components
- Damping adjustable
- Yes
- Damping adjustment
- Yes, 16 settings
- Ride-height adjustment
- Full-length, depending on axle design
- Damper construction
- Twin-tube
- Damper housing
- Sealed construction
- Damper service
- Replacement of the damper body; no overhaul of the existing sealed damper
- Front upper mounts – XPA1G
- Not included (TEIN code STD)
- Rear upper mounts – XPA1G
- Reinforced rubber upper mounts (TEIN code R/U)
- Springs
- Included in the suspension kit
- Front spring free length – XPA1G
- 200 mm
- Rear spring free length – XPA1G
- 262 mm
- Front spring inner diameter – XPA1G
- 70 mm
- Recommended adjustment range
- Recommended lowering ranges depend on the vehicle application. They are not the maximum mechanically possible adjustment ranges.
Approval & application scope
- Approval
- with TÜV certificate
- TÜV application scope
- The TEIN TÜV listing used here applies to Toyota GR Yaris XPA1G (DEU), 2020 to 03/2024. It is not extended to the GXPA16 grades.
- Front axle-load limit – XPA1G
- 970 kg according to the TEIN certificate note
- Rear axle-load limit – XPA1G
- 900 kg according to the TEIN certificate note
- Certificate note
- The complete certificate and its vehicle and application scope govern fitment. The manufacturer listing does not replace checking those documents.
Vehicle gradeXPA1G
2020 to 03/2024
- vehicle
- Toyota GR Yaris, chassis XPA1G
- production period
- 2020 to 03/2024
- standard lowering front
- 30 mm
- recommended lowering front
- 20–30 mm
- standard lowering rear
- 30 mm
- recommended lowering rear
- 20–30 mm
- installation notes
- Front: camber-adjustable lower bracket. Two sets of Type-D adjustment collars with different offsets are included.
Vehicle gradeGXPA16 RZ HIGH PERFORMANCE
09/2020 to 03/2024
- vehicle
- Toyota GR Yaris, chassis GXPA16, grade RZ HIGH PERFORMANCE
- production period
- 09/2020 to 03/2024
- standard lowering front
- 25 mm
- recommended lowering front
- 15–35 mm
- standard lowering rear
- 20 mm
- recommended lowering rear
- 10–30 mm
- installation notes
- Front: camber-adjustable lower bracket. Two sets of Type-D adjustment collars with different offsets are included.
- certificate scope
- No TÜV certificate is evidenced for this grade in the reviewed sources. The XPA1G listing must not be applied to GXPA16 as a blanket approval.
Vehicle gradeGXPA16 RZ
09/2020 to 03/2024
- vehicle
- Toyota GR Yaris, chassis GXPA16, grade RZ
- production period
- 09/2020 to 03/2024
- standard lowering front
- 25 mm
- recommended lowering front
- 15–35 mm
- standard lowering rear
- 20 mm
- recommended lowering rear
- 10–30 mm
- installation notes
- Front: camber-adjustable lower bracket. Two sets of Type-D adjustment collars with different offsets are included.
- certificate scope
- No TÜV certificate is evidenced for this grade in the reviewed sources. The XPA1G listing must not be applied to GXPA16 as a blanket approval.
Vehicle gradeGXPA16 RC
09/2020 to 03/2024
- vehicle
- Toyota GR Yaris, chassis GXPA16, grade RC
- production period
- 09/2020 to 03/2024
- standard lowering front
- 30 mm
- recommended lowering front
- 20–40 mm
- standard lowering rear
- 25 mm
- recommended lowering rear
- 15–35 mm
- installation notes
- Front: camber-adjustable lower bracket. Two types of Type-D adjustment collars with different offsets are included. Data was obtained from a vehicle equipped with the optional transfer case and automatic climate control.
- certificate scope
- No TÜV certificate is evidenced for this grade in the reviewed sources. The XPA1G listing must not be applied to GXPA16 as a blanket approval.
EDFC & accessories
- EDFC compatibility
- EDFC accessories are available separately. TEIN lists the following components for these applications; they are not stated to be included with the suspension kit.
- EDFC5 controller
- EDK04-R6655
- EDFC GPS accessory
- EDK07-P8022
- EDFC motor kit
- EDK05-12120
- EDFC additional part
- EDK08-P8514-12
Weight & manufacturer details
- Weight in TEIN list
- 31.79 kg
Description & frequently asked questions
TEIN FLEX Z for the listed GR Yaris applications
Suspension kit VSTN0-C1AA3 is listed for the Toyota GR Yaris applications below. Compare the chassis code, grade and production period with your vehicle before selecting this kit.
Vehicle applications and technical information
Product attributes provide technical figures and installation notes separately for each grade. Use only the figures for the matching application. Production period is not necessarily the date of first registration.
Check certificate scope and accessories
The TEIN TÜV listing used here refers to XPA1G (DEU). Check the complete certificate, including axle-load limits and application scope. EDFC components are separate accessories.
Frequently asked questions
Does this kit fit every Toyota GR Yaris?
No. Chassis code, grade and production period must match one of the listed applications. First registration alone is not sufficient to identify the correct application.
Does the TÜV listing cover every listed grade?
No. The TEIN listing reviewed here refers to XPA1G (DEU). It is not extended to GXPA16. Check the complete certificate and the details for your exact vehicle.
Is EDFC included with the suspension kit?
EDFC is separate equipment. Components listed by TEIN are shown in the accessory information and are not stated to be included with this suspension kit.
Which lowering figures apply to my vehicle?
Figures depend on the vehicle grade. Use the front and rear figures for the matching application. The recommended range is not the maximum mechanically possible adjustment range.
Example image – the actual product may differ from the illustration.
Characteristics & additional product details
TEIN EUROPE sp. z o.o., ul. Wrzesinska 70, 62-025 Kostrzyn, Poland, Email: info@eu.tein.com
There are no reviews yet.
2% bank transfer discount
EU delivery with FedEx
Free shipping from €500
